How do I find a plumber to completely renovate my home? Three axes for selection and how to use them depending on the consultation destination

Rate this post

Introduction: What you will learn from this article

Full renovations, which involve completely renovating a house, often involve redoing almost all of the water supply, hot water supply, and drainage, and the plumber's skills and planning ability greatly affect both the finished product and the cost. On the other hand, there is sparse information about where to ask at the entrance. Surprisingly, specialized books do not mention the concerns of choosing a consultant, such as "Can I use a contractor outside the local government where I live?", "Is it okay to use a matching service like the Living Market?", "What should I look at in the estimate to avoid regretting my choice?"

This article will focus only on ``how to find and choose a plumber'' based on the premise of a complete renovation. Separate articles cover specific details on how to proceed with construction, the timing of requests, and the legal boundaries of how much you can touch with DIY, so please read back and forth as needed.

You can understand the chronological order of request timing in the separate article ``Complete Guide to Request Timing to a Plumber'', the separate article ``The boundary line between DIY and designated contractors'', ``The boundary line between designated water supply equipment construction companies and designated drainage equipment construction companies when proceeding with DIY water work'', and the practice of preliminary plumbing for unit baths and kitchens in the separate article ``Complete Guide to Preliminary Piping for Unit Baths and Kitchens Provided by DIY''.

If you're wondering "How much renovation or remodeling can I actually do on my own home?" or "Where should I even start?", please visit this page. If you're looking to learn more about specific renovation processes or construction details, don't miss this page as well!

Information on updates to this website will be delivered to you once a month.NewsletterIf you are interested, please register.

Please note that this document is not necessarily accurate, and should be used as reference information only.

So, here you go.

Main premise: Not everyone can do plumbing work.

The first thing to note is that according to the Water Supply Law and the ordinances of each local government, only “designated water supply equipment construction companies” can perform construction work that connects water supply pipes and hot water supply pipes to the main pipe within residential areas (Ministry of Health, Labor and Welfare, 2024). Regarding drainage, many local governments have designated ``designated drainage equipment construction shops''. In other words, if all the piping is redrawn during a full renovation, it is essential that a designated contractor be involved at some stage.

This "designation" is issued for each municipality, and the designation for City A is only valid for mains connection work within City A. If you are going to make a mains connection in neighboring City B, the contractor must also have a separate designation for City B. Many plumbers have all the specifications of nearby municipalities, but if you live far away, such as across prefectures, it is common for them to be unable to connect to the mains because they are not designated. This is the starting point for the question of whether it is okay to rely on a contractor outside the local government.

Can I ask a contractor outside the local government?

In conclusion, the answer is that it depends on the nature of the construction.

As long as the work inside the house, from the water supply/hot water supply beyond the meter to the drainage header inside the house, is done by a designated contractor, it can practically be passed by any local government. This is because this is on-site work that involves routing pipes, making joints, and connecting them to faucets. Physically, ``designation by the local government'' is required for parts that involve the local government's infrastructure, such as main connection, water meter installation, and installation in public basins.

Therefore, a realistic option would be one of the following:

The first pattern is to "request all services from a company that is designated and registered in your local government." The process is quick, and responsibility is unified from mains connection to in-house plumbing. If it's a full renovation, please make it your first choice.

The second pattern is to rely on a skilled contractor outside the local government to handle only the inside of your home, and to divide the work of connecting the mains to another designated local contractor. This is used when you want to cut costs or use a plumber from outside the prefecture that you already have a relationship with. However, if you do not first clarify on paper where the demarcation point of responsibility lies, there is a risk that each party will impose pressure on you in the event of a problem. If you are going to do a full renovation in this form, it is essential to share the drawings at the design stage and decide on the arrangements for attendance.

Finally, contractors who are not even designated by the local government are out of the question when it comes to construction that touches the mains. If someone says, ``We don't have a designated contract, but we can do it cheaply,'' please do not entrust any work other than work inside your home. Not only would this be a violation of the law, but it would also not pass post-construction inspections and water would not be able to flow through it.

3 ways to ask and unsuitable for full renovation

There are three main ways to ask a plumber. Organize with full renovation projects in mind.

Pattern A: Via the main contractor of a local construction company/renovation company

This is a form of asking a construction company, ``Please also complete the plumbing work.'' The main contractor arranges for a subcontracted plumber, and the client only interacts with the construction company.

The advantage is that the construction company takes care of all the arrangements with other occupations. A full renovation is a complex job site where the carpenter, electrician, gas shop, tile shop, and interior decorator all work in order, and the key is coordinating who works when. If you leave it to the main contractor, the adjustment cost here will be zero.

The disadvantages are that the middleman margin is involved, so the water work costs tend to be higher than when ordering individually, and the owner cannot choose the subcontractor's plumber. Even if the contractor arranged by the main contractor happens to be lacking in skill or friendliness, it is difficult for the client to insist on replacing the contractor. If you are assuming that you are entrusting the entire renovation to a construction company, this method is the least stressful.

Pattern B: Order directly from the plumber (separate order)

This is a pattern in which the owner searches for a plumber himself and contracts with him directly. This is often the case at sites where a design office builds on the premise of separate orders, or where the client himself handles some of the work himself.

The advantages are that there are no middlemen margins and you can choose your own vendor. If you find a competent plumber, you will get the best price and quality.

The disadvantage is that the client has to make arrangements with other occupations. The plumber will ask the owner or main contractor, ``When should I come in?'' A full renovation requires at least 4 to 5 on-site visits, including preliminary plumbing to go under the floor immediately after demolition, final adjustments before insulation and floor finishing, connections during unit bath installation, connections during kitchen installation, and final water flow test. Assembling all of this yourself is quite difficult for people who have a day job.

Pattern C: Matching service such as Living Market, Mitumore, etc.

This is a pattern of online matching services that has been rapidly increasing in recent years. Once the owner enters the conditions, multiple contractors will return estimates.

The advantages are that it is easy to get competitive quotes, and the psychological hurdles are low because you can see reviews and ratings. It is extremely convenient for small-scale one-off projects such as replacing just one faucet, replacing a mixed faucet, and installing a toilet.

The disadvantage is that it is not suitable for long-term projects on a full renovation scale or projects involving multiple occupations. Most matching services have a fee structure based on one-off work, and there are only a limited number of companies that will consult with you from the design stage while looking at the drawings. Additionally, some vendors may not be registered as ``designated water supply equipment construction business operators'' (they only perform small-scale repairs). If you are requesting a full renovation that includes the mains connection, be sure to ask first whether or not it is registered.

At present, the practical solution is to use Pattern A or B for the entire renovation, and Pattern C for one-off repairs or small-scale troubleshooting after the renovation.

6 points of view to find a reliable plumber

We have narrowed it down to six specific points of view that you can use to talk to contractors and decide whether something seems okay here or something suspicious.

Viewpoint 1: Can you provide the registration number of the designated water supply equipment construction business operator?

A company that can respond immediately when asked by phone or email, ``Please tell me your company's designated registration number and issuing municipality,'' is highly reliable. A list of designated contractors is published on the homepage of each local government, so it only takes 5 minutes to check the fact of registration. Be wary of companies that simply reply, "We're fine."

Viewpoint 2: Will the estimate be provided in detail rather than as a “complete set”?

Avoid companies that offer estimates such as ``300,000 yen for a complete water and hot water supply'' when doing a complete renovation. For fully renovated piping work, main pipe connection costs, lengths of cross-linked plastic pipes and sheath pipes, number of joints, number of faucet connection points, water flow test costs, and miscellaneous expenses can be calculated independently. If it doesn't appear on the statement, it's easy to be told later that "this item is not included" or "this item is additional." Please base your estimate on a quote that is divided into at least the type of work (water supply, hot water supply, drainage) and that separately lists the cost of materials and labor.

Viewpoint 3: Are the warranty period and warranty scope clearly stated on paper?

Plumbing problems often occur several years after construction, rather than immediately after construction. Generally, the industry standard for warranties for plumbing work is 1 to 2 years (for residential equipment, there is a separate equipment manufacturer warranty). A verbal statement like ``We have a 10-year warranty'' is almost meaningless unless it is in writing. On the other hand, a policy with a one-year warranty but with clear details is far more reliable in terms of operation.

Viewpoint 4: Do you have experience in making arrangements with other occupations?

A fully renovated plumber will communicate with the carpenter, electrician, gas store, and interior decorator on site. There is a difference between a contractor who can make adjustments such as, ``I want to set up a water supply and a top and bottom water supply on this wall, so please ask the carpenter to position the studs in XX centimeters,'' and a contractor who can only ``build in according to the drawings that I was told.'' The smoothness of the job is completely different. If you ask someone over the phone, ``How do you usually prepare the preliminary piping for the kitchen and the UB?'', you can tell that a company has a lot of experience if they can immediately tell you about drawings and dimensions. The practicalities of advance piping itself are covered in detail in a separate article, ``A Complete Guide to DIY Advance Piping for Unit Baths and Kitchens.''

Viewpoint 5: Speed ​​and consistency of response

Whether you receive a reply to a request for a quote within three days, or whether you receive a reply to your on-site questions within the same day or the next day, will have a significant effect on your mental stability during the full renovation period. A full renovation is a multi-month project that requires many decisions during that time. A contractor who is slow to respond will cause the site to stop.

Viewpoint 6: Is the price too low?

A company that gives you an estimate that is half the market price is almost certainly missing something. There are cases where the mains connection is not included, the water flow test fee is separate, and the owner has to make separate arrangements because it is not specified and cannot apply for a permit. If you ask multiple companies to give you competitive estimates based on the same drawings and the same conditions, you can see extreme outliers at a glance. It is safe to get competitive estimates from at least three companies, and for full renovations, four to five companies (Ministry of Land, Infrastructure, Transport and Tourism, 2023).

Issues specific to full renovations: scale and setup

Full renovation plumbing work is different in scale from one-off repairs. If all three systems (water supply, hot water supply, and drainage) are rewired, there will be dozens of meters of in-house plumbing, dozens of joints, and 7 to 10 faucet connections (kitchen, sink, bathroom shower, bathroom tap, laundry, toilet water supply, outdoor faucet, etc.). When it comes to this scale, the experience of the contractor directly affects the quality.

In particular, coordinating with other occupations will push the difficulty level of a full renovation project to the next level. The basic flow is that immediately after demolition, we go under the floor and install preliminary piping, then the carpenter installs the floor assembly and insulation, the electrical wiring, the interior work as the foundation, and finally the plumber returns to install the UB and kitchen. If you do not decide at the outset who will control the entrance/exit procedures, the contractor, the main contractor, or the owner, the site will come to a standstill.

If the order is placed through a construction company, the main contractor will need to take on the role of hub, and if the order is placed separately, the client or design office will need to take on the role of the hub. If you are a one-time matching service provider, there is no motivation to take on this hub in the first place, so please consider that it is impossible to entrust the entire renovation. For details on how to set the timing itself, please refer to the separate article ``Complete Guide to Timing Requests to a Plumber''.

List of questions to ask when first talking to a contractor

Here are six questions you can ask when first calling or emailing to select a business partner, and you'll instantly get an idea of ​​the other party's ability and compatibility.

One, "Please tell us the registration number of your company's designated water supply equipment construction business operator and the issuing municipality." lowest line.

Second, how many projects do you receive each year that involve full-scale renovations (complete rerouting of water supply, hot water supply, and drainage)? Contractors who make zero to one repairs per year mainly do one-off repairs and may not have much experience in setting up full renovations.

Three: "In what order do you usually work in other occupations (carpentry, electrical, gas, interior decoration) on-site?" Contractors who can respond immediately are experienced.

So, ``Will you prepare the preliminary piping for the kitchen and unit bath on site based on the drawings, or will you determine the position on the day of installation?'' The former is the preferred answer. If it is the latter, there will always be rework on the day of installation.

When asked, "Can you give me a detailed estimate for each type of work? I would like to avoid a complete set." If you are a contractor who is reluctant to do this, you can remove it from the beginning.

Mutsu: ``Could you please provide the warranty period and warranty scope in writing?'' Again, only paper-based companies can be trusted.

Summary: Decide on three axes for selection and use different routes depending on the scale of the project

When choosing a plumber for a complete renovation, there are three main points to consider: ``registration,'' ``transparency in estimates,'' and ``experience in coordinating with other professions.'' You can find a plumber that meets these requirements by going through a local construction company, placing separate orders, or matching.If it's a full-scale renovation, it's realistic to go through a construction company or place a separate order, and if it's a one-off repair, you can use matching.

If you wish to use a contractor outside your municipality, it is safe to have a designated local contractor handle only the mains connections. Allowing unspecified contractors to touch the mains is a violation of the law and will not pass inspection. For more information on the legal delineation, please also read the separate article ``The boundaries between designated water supply equipment construction companies and designated drainage equipment construction companies when proceeding with DIY water work.''

In parallel to this article on ``How to choose'', DIY Renova also covers related topics related to plumbing work, such as ``When to request'', drawing the legal line on how far you can do DIY yourself and where it becomes the exclusive domain of designated contractors, and advance plumbing for UB/kitchen.

If you're wondering "How much renovation or remodeling can I actually do on my own home?" or "Where should I even start?", please visit this page. If you're looking to learn more about specific renovation processes or construction details, don't miss this page as well!

Information on updates to this website will be delivered to you once a month.NewsletterIf you are interested, please register.

Well, then!

References

  • Ministry of Health, Labor and Welfare (2024). Outline of the water supply system construction chief engineer system. Ministry of Health, Labor and Welfare homepage.
  • Japan Water Works Association (2023). Guidelines for the designation system for water supply equipment construction companies.
  • Ministry of Land, Infrastructure, Transport and Tourism (2023). Handbook on how to choose a home remodeling business.
  • Cabinet Office, National Consumer Affairs Bureau (2022). Collection of case studies of consumer troubles related to housing renovation work.

Leave a Reply

en_USEnglish